Metal Roofing in Amarillo, TX
Standing seam and R-panel metal roofs engineered for the two things the Panhandle guarantees: wind and hail.
- ✓ Locally owned in Amarillo
- ✓ 1,000+ Panhandle projects
- ✓ 98% claim approval rate
There's a reason metal roofs keep multiplying across the Texas Panhandle: this is the climate they were made for. A properly installed standing-seam roof shrugs off wind that strips shingles and survives hail that totals asphalt roofs. It sheds our rare-but-heavy snow loads and reflects the summer sun that cooks everything else. It's a 40-to-60-year roof in a region where shingles are lucky to see 25.
CRS installs the full range of metal systems. Standing seam with concealed fasteners suits homes where longevity and clean lines matter most. R-panel and PBR panel cover shops, barns, and budget-conscious re-roofs. Metal-over-shingle retrofits work where code and decking allow. We're as candid about metal's economics as we are about everything else. It costs roughly twice what architectural shingles do. For some roofs that math is brilliant; for others it never pays back. We'll show you both columns before you decide.
From Wolflin bungalows to working ranches outside Bushland, we've put metal on every kind of Panhandle structure. If you're weighing metal against Class 4 shingles, start with the free inspection and an honest conversation about how long you plan to own the roof.
Standing seam for most Amarillo homes runs $18,000–$35,000; R-panel systems for shops and barns run well under that. Free inspection and both-columns math first.
Book My Free Inspection →What's Included
- ✓ Standing seam with concealed, wind-rated clip systems
- ✓ R-panel / PBR panel for shops, barns, and outbuildings
- ✓ Kynar 500® painted finishes with fade-and-chalk warranties
- ✓ Metal-over-shingle retrofit where structure allows
- ✓ Snow retention, sealed penetrations, and matching trim packages
Why Metal Fits the Panhandle Better Than Almost Anywhere
Match metal's strengths against Amarillo's weather and the overlap is striking. Sustained wind works shingle tabs loose for a living. Interlocked standing seams have no tabs to lift, and they carry uplift ratings far beyond asphalt systems. Hail? Steel dents where asphalt breaks: cosmetic versus structural failure. Hundred-degree UV bakes the oils out of asphalt shingles, but a PVDF finish shrugs it off for decades. The Panhandle's occasional heavy snow slides off a 26-degree metal slope before it ever becomes a load problem.
The honest column on the other side starts with up-front cost, roughly double shingles. Lighter gauges can dent cosmetically in hail, and an insurance waiver question comes with that. A bad metal install is also harder to fix than a bad shingle install, because panel systems have no tolerance for improvised flashing. That leads to the part of this page that matters most: the crew.
Metal Is an Installer’s Game
Shingle experience does not transfer to metal. Panels move with temperature, and an Amarillo roof cycles through 60-degree swings in a day. Every clip, closure, and penetration detail has to accommodate that movement. Otherwise the roof destroys its own fasteners over a few seasons. Oil-canning, leaking sidewall flashings, and screw lines that back out in year five are all signatures of shingle crews doing metal work.
Our metal crews do metal: panels cut to length, clips spaced to the engineering, closures and butyl in every rib at eave and ridge, and boots and curbs designed for panel movement. On standing seam, that's the difference between the 50-year roof you bought and a 15-year headache with a 50-year price tag. Ask every metal bidder, ours included, who exactly is installing and how many seam roofs they ran last year.
Homes, Shops, Barns: Matching the System to the Building
For homes, standing seam earns its premium. It offers concealed fasteners, crisp shadow lines that suit everything from Wolflin brick to new builds in The Colonies, and a warranty measured in generations. Shops, barns, and ag buildings are Panhandle staples. There, R-panel and PBR deliver enormous durability per dollar, especially over open framing where speed and span matter more than concealed fasteners.
We also do the hybrid work rural Randall and Potter County properties actually need. Think house in standing seam, shop in R-panel, matching trim across both, and snow retention over the doorways you use daily. One contractor, one warranty conversation, one crew that shows up for all of it.
Manufacturer & industry resources: Metal Roofing Alliance
Did You Search for "Metal Roofing Near Me"?
If you searched from anywhere in the Amarillo area, the local answer is here. Our crews leave from 3866 Business Park Dr on Amarillo's south side. Find CRS Roofing & Construction on Google Maps . Most metro addresses sit 10 to 20 minutes from our shop. Panhandle towns ride scheduled routes with no travel fees. The free inspection books within days, or call (806) 290-0639 for a real time window today.
Get a Free Metal Roofing Quote
Fill this out and we’ll text you back fast, usually within the hour.
From a Real CRS Job Site
Metal Roof Going Up: A CRS Crew at Work
Why Amarillo Trusts CRS for Metal Roofing
40–60 Year Service Life
A metal roof is routinely the last roof a Panhandle homeowner buys. It covers two to three shingle cycles in one install.
Wind & Hail Superiority
Concealed-fastener systems rated for winds far beyond shingle limits, and panels that dent cosmetically where asphalt fails structurally.
Energy Reflectivity
Reflective finishes cut summer attic heat gain measurably, a real number on an Amarillo August electric bill.
Our Metal Roofing Process
- 1
System Consult
Standing seam vs. panel, gauge, finish, and honest cost-per-year math.
- 2
Engineering & Order
Exact measurements; panels rolled or ordered to length — no field seams where they don’t belong.
- 3
Install
Underlayment, panels, trim, and flashing installed by metal-experienced crews.
- 4
Detail & Warranty
Sealed penetrations, finished trim, finish warranty registered.
Metal Roofing Timing in the Panhandle
Metal installs are less temperature-sensitive than shingles because no sealant strips wait on heat. The Panhandle metal season runs essentially year-round. It pauses only for wind days, since panels are sails until they're seamed, and for active weather. Fall and winter are quietly the best scheduling windows. Lead times on rolled panels and Kynar finishes are shortest outside storm season, and crews aren't racing hail-claim backlogs.
The strategic timing note mirrors shingles. If your current asphalt roof is one hail season from replacement anyway, run the numbers on metal before spring. A qualifying storm may even fund the base roof. That beats paying for a shingle roof in June and wishing you'd gone metal in July.
Metal Roofing FAQs
How much does a metal roof cost in Amarillo?
Standing seam typically runs $18,000–$35,000 for an average Amarillo home, roughly double architectural shingles. Exposed-fastener R-panel systems run meaningfully less and are popular on shops and barns. The per-year math often favors metal if you plan to own the home more than 15 years; we lay out both columns in the quote.
Standing seam vs. R-panel — what’s the difference?
Standing seam conceals its fasteners under raised, interlocked seams. There are no exposed screws to back out and no gasket washers to age in the UV. That is why it carries the longest warranties and suits homes. R-panel fastens through the face. It is cheaper and fast to install, ideal for shops and barns, but its screws need periodic checking. We install both and will tell you plainly which fits your building.
Does hail ruin a metal roof?
Large hail can cosmetically dent metal, but the panel keeps water out. Shingles are different: the same stone breaks the waterproofing itself. Heavier gauges and textured finishes hide most dings. One insurance note: some Texas policies attach cosmetic-damage waivers to metal roofs. Dents without leaks may not be covered. We'll flag that trade-off before you buy.
Is a metal roof loud in the rain?
Over an open shop frame, yes. A home is different: decking, underlayment, insulation, and a ceiling sit between you and the panels. Rain on metal there measures about the same as rain on shingles. The tin-roof-on-a-barn sound is a barn phenomenon, not a house one.
Can you install metal over my existing shingles?
Often yes, over a single flat layer with sound decking. Furring and code checks are included. It saves tear-off cost and landfill fees. We verify deck condition first, because burying rot under a 50-year roof is a bad trade. If the deck is questionable, tear-off is worth the difference.
Do metal roofs attract lightning?
No. Lightning strikes the tallest path to ground regardless of material. If anything, a metal roof handles a strike more safely. It’s noncombustible and disperses energy rather than igniting like wood or asphalt can.
What gauge and finish should I choose?
For Panhandle homes, 24-gauge standing seam with a Kynar 500® (PVDF) finish is the standard we recommend. The thicker steel resists hail denting, and the finish holds color against our UV for decades. 26-gauge is a reasonable economy for outbuildings. We show physical samples of both so the difference is in your hands, not a spec sheet.
How long will a metal roof really last here?
Standing seam with a quality finish: 40–60 years, with the finish warranty itself typically running 30–40. Exposed-fastener systems: 25–35 years with fastener maintenance around year 15–20. Either way you're buying multiple shingle lifecycles. It explains why the higher up-front cost keeps winning the long math.
Explore Our Other Roofing Services
Metal Roofing Across the Texas Panhandle
One local crew, 10 Panhandle communities. Wherever you are between Dalhart and Childress, you get the same careful installation and the same warranties. You get the same honest inspection-first process. Browse all service areas or jump straight to yours:
Chase · CRS Roofing & Construction
The Same Local Crew, From Inspection to Final Nail
CRS isn't a storm-season franchise. It's a locally owned Amarillo roofing company headquartered on Business Park Drive. The same local team inspects your roof, walks your insurance adjuster through the damage, and stands on your shingles. Nothing gets lost between a call center and a crew. We're still here every year after the job.
- ✓ 1,000+ Panhandle roofing projects
- ✓ Real Amarillo shop: 3866 Business Park Dr
- ✓ Fully insured, references on request
- ✓ 5.0-star rated on Google
Amarillo Trusts CRS for Metal Roofing
See why neighbors across the Panhandle trust CRS. Read more real reviews or find us on Google .
“CRS worked really hard to get my insurance company to see that a new roof was needed. Very fair pricing. Their crew removed the old roof and installed a new roof all in the same day. Clean up was excellent.”
“Exceptional work by CRS! They even helped us get the most out of our insurance claim when the insurance lowballed our initial claim. Chase and his team stopped by multiple times during the project.”
“Chris Erdman with CRS Roofing is fantastic to work with. He assisted me with fixing a roof leak at a commercial property I manage that has been challenging for years to get fixed.”
Ready for Metal Roofing?
Call or text for a free inspection. You get drone photos, a written report, and a straight answer, usually within days.